31
The machine loses pressure. Residual liquid may leak out of the beverage
spout. The used capsule then falls into the used capsule container.
M
If you would like to stop the brewing process prematurely, press the
same beverage button again while brewing.
Making espresso and caffè crema involves prebrewing a small
amount of espresso or caffè crema. This is to allow the flavours to
develop fully. This process can be identified by the short pause at
the beginning of the brewing process. Black coffee is made without
prebrewing.
Default settings upon purchasing the machine:
Espresso
approx. 40 ml I
Caffè crema
approx. 125 ml
Black coffee
approx. 125 ml
Tip:
You can adjust the strength of the beverage by adjusting the quantity
of water. Refer to the section titled “Adjusting the strength of the
beverage (beverage quantity)” for information on how to do this.
After use
m
Empty and clean the front drawer, drip tray and used capsule container
on a regular basis.
1. Lift off the drip tray.
2. Pull out the front drawer as
illustrated.
3. Remove the used capsule
container.
The used capsule container
must be emptied daily or
when it is full.
The used capsule container
holds approx. 6 capsules.
4. Empty the used capsule
container.
5. Empty the front drawer.
6. Empty the drip tray
if necessary.
7. Reinsert all parts into the
machine in reverse order.
en
113420 en Cafissimo Pure+ v6.indd 31
113420 en Cafissimo Pure+ v6.indd 31
06.01.23 15:19
06.01.23 15:19
