6
1. Make sure that the used capsule container is
pushed all the way in and that the drip tray is
correctly in place.
2. Fill the water tank with fresh, cold tap water
or drinking water up to the MAX mark.
- Either pour the water through the opening in
the water tank as illustrated or
- take hold of the sides of the water tank as
illustrated and pull it up and out. Fill it with
water. When inserting it, press the water tank
down as far as it will go to ensure that the
valve in the base engages in the casing.
3. The lever must be in the down position.
Fold it down if necessary.
4. Place a cup beneath the coffee spout.
MAX
Initial operation – Prior to first use
5. Plug the mains plug into an easily accessible
wall socket.
6. Press the On/Off switch to switch on the
machine.
The coffee buttons and indicator light flash.
7. Press any coffee button.
The pump starts to operate. As soon as the pipes are filled with water the pump
stops automatically. A small quantity of water runs into the cup beneath the
spout.
The indicator light goes out. Only the three
coffee buttons then continue to flash and the
machine heats up to prepare the coffee.
8. Pour away the water that is in the cup and rinse the machine twice as
described in the next section. The machine is then ready for use.
