Installation of the machine - Service Provider Manual
11.5
Changing a parameter
All editable parameters can be very easily changed.
When the page containing the value you wish to change is displayed, press “OK”.
1.2.1.
Std Temperature
100
Warning! When you change a machine operating parameter, you should be
aware that you are changing an operating parameter set by the manufac-
turer for the purpose of ensuring optimal machine performance.
The value will become editable and the
“ ”
symbol will appear beneath the digit to be chan-
ged.
1.2.1.
Std Temperature
100
Press one of the two keys to change the value.
When the required value is displayed, press
“OK”
.
1.2.1.
Std Temperature
100
The value will be memorised and the next digit will become available for editing.
Change the value of the next digit, if necessary, using the “ ” o “ ” key.
When the required value is displayed, press
“OK”
.
The value will be memorised and the next digit will become available for editing.
1.2.1.
Std Temperature
100
Change the value of the next digit, if necessary, using the “ ” o “ ” key.
When the required value is displayed, press
“OK”
.
The “ ” symbol will disappear and the settings will take effect only when you exit the program
mode.
11.6
Exiting the program mode
To quit the program mode, the following page must be displayed by pressing
“ESC”
.
3.
Exit
When the message appears on the display, press
“OK”
.
3.
Exit
• 7 •