13
4. Press the button for the type
of coffee you would like:
Espresso or
caffè crema
The grinding and brewing process starts and stops automatically.
A small amount of coffee is pre-brewed to allow its flavours to develop
fully. This process can be identified by the short pause at the beginning
of the brewing process.
If you would like to stop the
brewing process prematurely,
press the same coffee button
again while brewing.
Tip:
You can change the amount of the beverage being brewed. Learn more about
how to do this in the chapter titled “Adjusting the beverage amount”.
When the container for
the coffee grounds is full
(after 10 brewings), the
“Empty coffee grounds”
symbol will light up.
m
Default settings upon purchasing the machine:
espresso
approx. 40 ml –
caffè crema
approx. 125 ml
5. Empty the leftover water tray, the
container for the coffee grounds
and the drip tray regularly:
Remove the drip tray.
Pull the leftover water tray
with the container for the coffee
grounds out of the machine.
6. Empty the container for the
coffee grounds, the leftover
water tray and the drip tray
as necessary.
7. Reinsert all parts in the machine.