67
5. Put the milk spout back on.
6. Place the cover back on the
coffee/milk spout. It is held
in place by magnets.
7. Attach the rotary dial back
onto the milk froth rotary
control. Push it on as far
as it will go.
8. Insert the stainless steel
wand into the silicone tube
as shown.
9. Attach the silicone tube
to the milk froth rotary
control as shown.
10. Open the cover cap on the
coffee/milk spout.
11. Insert the milk froth rotary
control into the connection
port as shown, pushing it in
as far as it will go and making
sure to keep it completely
straight.
en
106466 en Esperto_Pro_v5.indd 67
14.06.21 12:24