HGL Manual
5.0 PQconnect Connectivity
21
PQconnect Quick Start Unit Software Setup
•
Verify connections to the PCB via ModbusRTU over RS485 before filter is energized
•
Download PQvision software found on our website: https://transcoil.com/wp-
content/uploads/2018/11/PQvision-Setup-v1.zip
•
Enter password:
08252014
to access software package
•
Select communication port (Data should be shown after the board communicates)
o
Note: Default Modbus settings of the application are below.
o
Baud rate: 115200
o
Parity: Even
o
Slave Address: 10
o
See PQconnect Display connections section for changing the default settings
PQconnect Bluetooth
®
App Setup
System Requirements:
Android OS 5.0 or higher
Bluetooth 4.2
Installation Instructions
1. Download the app using your mobile device.
2. Extract the contents of the downloaded zip
folder.
3. Tap on the APK file to install. Note: The Android
system may require permission to install apps
from sources other than the Play Store.
4. A warning may appear. Click on settings and
click slider for “allow from this source.”