TCL 10T3E1, Let'S Get Started

10

11

How to Control Your AC

All the basics you need to know to stay cool!

1.

Digital Display:

 When the timer is not 

in use, the operation mode and the set 

temperature will be displayed. Time  will be 

displayed under the timer setting.

Time will be displayed under timer setting.

2.

 and 

 Buttons –

 use these buttons 

on the control panel or remote control 

to increase or decrease the desired 

temperature, or time using the Timer. The 

temperature range is: 

61°-88° Fahrenheit, or 16°-31° Celsius

3.

Power Button: 

Turn the air conditioner on 

and off.

4.

Modes –

 Press the Mode button on the 

control panel to cycle and select a Mode, 

or select a Mode by pressing the desired 

button the remote.

• Cool Mode - 

The cooling function allows 

the air conditioner to cool the room and 

reduce air humidity at the same time. Adjust the fan speed and temperature to your desired 

comfort level. In this mode, if Eco is not enabled, the fan may continue to run after reaching 

the desired temperature.

 • 

Dry Mode – 

This function reduces the humidity of the air to make the room more 

comfortable. Press the Mode button to set to Dry mode. An automatic function of alternating 

cooling cycles and air fan is activated.

• Fan Mode: 

Fan Mode helps to circulate air in your home, but only works when the air 

conditioner is vented

• Auto Mode: 

In Auto mode the unit automatically chooses the fan speed and the mode of 

operation (Cool, Dry or Fan).In this mode the temperature is set automatically according  

to the room temperature (tested by the temperature sensor which is incorporated in the 

indoor unit.).

• Heat Mode: 

The heating function allows the air conditioner to heat the room. Press the Mode 

button to activate the heating function. To optimize the function of the air conditioner, adjust 

the temperature and the speed by pressing the button indicated.

5.

Timer Button –

 press the Timer button on the panel or the Timer button on the remote to set 

the timer.

  • Set Timer On:  

With the AC off, press the Timer button and then use the 

 and 

 buttons to set the desired temperature. Press the Timer button again and 

  use the 

 and 

 buttons to set the desired amount of time before the AC turns on. 

  Press the timer button again to start the countdown.

  • Set Timer Off: 

With the AC on, press the Timer button and then use the 

 and 

  buttons to set the length of time before the AC will turn off. Press the timer button again 

  to start the countdown.

Note:

 It can be set to automatically turn off or on in 0.5-24 hours. Each press of the