background image

5

USB socket (input) 

Sockets

Note: The location and names of the sockets on the TV may vary according to 
TV model, and not 

all sockets available on all models. 

   

USB 

This socket can be used to connect an USB device.

 

Introduction

1.       /

 button 

MENU

    Turns the TV on or standby. 
    menu or press to return to the previous menu.Before enter menu, long press
       /

MENU

 button for 2 seconds to display Source Select. Long press it for 5 

    seconds to go to Standby.

 The TV is on,press it,brings up the main 

Buttons on the TV

Take a certain model for an example:

    

Note

:

 Under USB condition,  

CH.+ 

button acts like INPUT button in remote to select different sources and 

. Press 

CH.-

 button to display or cancel the menu at bottom.    /

Menu

 button 

    can act like the OK button on the remote.

CH.+/-

 button 

    can’t work act like up/down direction buttons

 

3. 

CH. +

/

-

 button

    Scans up/down through the channel list. In the menu system, they act like the up/down 
    remote and adjust menu controls.

direction buttons on the 

 

2. 

VOL. +/-

 button

    Increases/decreases the volume. In the menu system, they act like the right/left 
    direction buttons on the remote and adjust

 

menu

 

controls

.

 (Note: In some menus, 

    VOL.+ also acts like the OK button on the remote.)

 

HDMI 1

HDMI1 and HDMI2 socket (input) 

HDMI 2

( HL)

M

or

The HDMI 

can be used to connect a 

PC with a compatible video card installed, certain DVD players or a high-definition 
compatible digital satellite decoder. This socket p

(High-Definition Multimedia Interface) socket 

rovides an uncompressed digital 

connection that carries both video and audio data by way of an integrated mini-plug 
cable.

NOTE:

 HDMI2 support MHL.

AV(VIDEO)/YPbPr component sockets (input) 

Y/VIDEO

Pb

Pr

COMPONENT / AV

 IN 

These AV(VIDEO)/Y sockets can be used to connect a device that has component
video sockets, such as a DVD player. The component sockets can recognize if the
device you're connecting to is Y Pb Pr compatible. The component sockets provide 
excellent picture quality because the video is separated into three separate parts. 

CH

.-

CH

.

+

+

R

L

AV &PC&COMPONENT

AUDIO IN

AV & PC & 

AUDIO IN 

COMPONENT

 

These AUDIO IN L & R sockets can be used to connect a range of equipment, 
including video recorders, camcorders, satellite receivers, DVD players, or games
consoles. AUDIO IN sockets  are shared by AV,VGA and YPbPr sockets.

SPDIF

SPDIF/AUDIO sockets (output) 

PC socket (input)

This socket can be used to connect a computer. 

PC

 

IN

AC IN~

AC In socket (input) 

This socket can be used to connect a 

.

 

AC supply

Summary of Contents for 32B2800























Reviews: