Factory Test & Alignment Specification For MS63EP1
和
EP2-LA Series (V1.0)
Page 15 of 16
module will sent the device ID information and user ID information to the local service and compare with the
data-base .so that the data is verified .
Appendix
”NETWORK CONNECTION AND TEST”
1.Network connection
You can set up your TV so that it can access the Internet through your local area network (LAN)
using a wired or wireless connection.
1.1Connecting to a wired network
You can attach your TV to your LAN using cable in three ways:
• You can attach your TV to your LAN by connecting the LAN port on your TV to an external modem
using a Cat 5 cable.
• You can attach your TV to your LAN by connecting the LAN port on your TV to a IP Sharer which is
connected to an external modem. Use Cat 5 cable for the connection.
• Depending on how your network is configured, you may be able to attach your TV to your LAN by
connecting the LAN port on your TV directly to a network wall outlet using a Cat 5 cable. Note that the
wall outlet is attached to a modem or router elsewhere in your house.
Select
Network > Wired
, then select
auto or manually
to connect to a wired
network.
Notes for password in Parental Control Lock function:
- The default password is 1234. You can change it to a new one.
- The super password is 0423. If you forget your code, enter the super password to override any
existing codes.
Appendix
“
Instructions of Updating SW
”
1.
The following IC should be pre-copied before SMT process
Positon
PART TYPE
Part Number
SW
U501
IC-TSOP48
13-FS29F2-G0B(CPP)
MBOOT:
V8-S463D01-LB1V0**.
bin
U501
IC-TSOP48
13-FS29F2-G0B(CPP)
Main Software( Contain
Mboot)
：
V8-S463D01-LF1V0**.
bin
Summary of Contents for 32D2900
Page 38: ......
