6.1 AUTO SEARCH
You can set your TV to receive local TV channels (from an antenna) or CATV channels (when you have Cable TV
service ). Then, use AUTO SEARCH to set up the channels that are available for you. This makes it easy for you
to select only the available TV stations when press the CHANNEL UP or DOWN button. Before you start AUTO
SEARCH, connect the Antenna or CATV signal as detailed.
Press the CHANNEL UP/DOWN button to select
Auto search
.
Press the VOLUME UP button to start the auto searching, and then all available
channels will be stored from No.1(in CATV mode) or No. 2(in TV mode) and
upward in order. Auto-searching will stop after all the frequency bands are
searched, and the last programme which you select before auto search action
will reappear on the screen. Press the VOLUME DOWN button if you need to
stop AUTO SEARCH during the process.
Activate the
PRESET
menu.
Press the CHANNEL DOWN button to enter submenu selection.
Press the CHANNEL UP/DOWN button to select
TV/CATV
.
Press the VOLUME UP/DOWN button to select
TV
or
CATV
to be the signal
source.
6.2 MANUAL CHANNEL TUNING
Press the VOLUME UP button to start searching upward(for example, starting at
channel 60 and going up to 61, 62, 63,etc.). Press the VOLUME DOWN button
when you find the channel you want. This stop the search, otherwise the search
will stop at the first available channel.
Or press the VOLUME DOWN button to start searching downward(for example,
starting at channel 60 and going up to 59, 58, 57,etc.). Press the VOLUME UP
button when you find the channel you want. This stop the search, otherwise the
search will stop at the first available channel.
When fine tuning is completed, press the MENU button to quit menu, or menu
will quit after a few seconds without further action.
Press the CHANNEL UP/DOWN button to select
Manual
.
First select the signal source. Activate the
PRESET
menu.
Press the CHANNEL DOWN button to enter submenu selection.
Press the CHANNEL UP/DOWN button to select
TV/CATV
.
Press the VOLUME UP/DOWN button to select TV or CATV(whichever you have).
Press the CHANNEL UP/DOWN button to select
Channel
.
Press the VOLUME UP/DOWN button to enter a
Channel No.
at which you
want to begin the search.
6. CHANNEL PRESET
NOTE:
Press and hold the MENU button on the front panel of the unit for a few
seconds to start auto search action directly.
Add/Erase
Fine
0
F a v o u r i t e l i s t
Add
2
Channel
Manual
Up
TV
TV/CATV
Auto search
Programming
P l e a s e W a i t
TV 3
Add/Erase
Fine
0
F a v o u r i t e l i s t
Add
CATV
TV/CATV
Auto search
Manual
Up
Manual Channel Tuning lets you quickly select the next available channel.
For example, if you are looking for a channel between 60 and 70, start the
search at channel 60 and go up.
Add/Erase
Fine
0
F a v o u r i t e l i s t
Add
61
Channel
TV/CATV
Auto search
Manual
Up
60
Channel
CATV
Add/Erase
Fine
0
F a v o u r i t e l i s t
Add
59
Channel
TV/CATV
Auto search
Manual
Down
CATV
6.3 FINE TUNING
Fine tuning function may improve the receiving quality for some weak /unstable
channels by adjusting the channel frequency manually.
First select the signal source. Activate the
PRESET
menu, then the highlight
bar is on
TV/AV
. Press the VOLUME UP/DOWN button to select
TV
or
CATV
to be the signal source.
Press the CHANNEL UP/DOWN button to select Channel, then press VOLUME
UP/DOWN button to entera channel No., e.g. 08.
Add/Erase
Fine
0
F a v o u r i t e l i s t
Add
59
Channel
TV/CATV
Auto search
Manual
Down
CATV
14
Summary of Contents for 34189S6
