Page 8
Connecting a component with a composite AV video cable
If the best connection available on your component is AV or composite video output, connect it to the
TV using a composite AV cable (not provided). Composite AV cables typically have three RCA-‐type plugs
on each end, color coded as follows:
•
Yellow: Video
•
Red: Audio, right channel
•
White or black: Audio, left channel
Connect each plug to the corresponding connector on
the component and on the TV.
Connecting a component with an HDMI
®
cable
If possible, connect your devices using HDMI
®
cables (not provided). They help to provide the best
video quality and also carry audio signals, so that only one cable is needed. For better picture
quality, we recommend that you use cables designated as High Speed (Category 2) HDMI
®
cables.
Tip
:
You might need to configure the component to send its signal through its HDMI
®
connector.
The connector labeled
HDMI IN (ARC)
has the additional ability to use the audio return channel to
send digital audio to a receiver or sound bar, as explained in “
Select models also have an audio line
out
connection that is not affected by TV volume or mute settings and does not disable the TV
speakers. Use this connection when you want to use your amplifier or sound bar to control the TV
volume. To turn off the TV’s built-‐in speakers, in the
Home
screen menu, navigate to
Settings >
Audio > TV speakers
and change the setting.
Connecting
an AV receiver or digital sound bar” on page
9
.
Connecting headphones or an analog sound bar
You can connect headphones or an analog sound bar (not provided) to the TV’s
headphone jack.