L1
Service
Manual
TCL
Communication Ltd.
Rev.
4060A Level 1 Service Manual
Page
1.1
16/28
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
Press *#2886# in dial screen and then you will see the interface displaying the SW version. Select
“Auto” to start the auto test, or select “MANU” to do the MMI test manually.
If one of the tests failed during “Auto” test mode, it will display “Failed: xxx, Press ‘Next’ to go on test;
Press ‘RETEST’ to retest this item; Press ‘END’ to Power off.”
Traceability
I. You can get information such as BT, CU-REF, PTH ,MMI,etc.,
II. Press “pass” key to continue.
TP RAW Data
I. You can see Raw data test is running;
II. Press “pass” key to continue;
Touch
Panel
I.
“Please draw in the yellow area” according to instructions
II. Press “PASS” to continue.
Display
I. You will see the LCD display three colors - RED, GREEN and BLUE - if it functions well;
II. Press “Pass” to continue.
III. You will see the LCD display black if it functions well.
IV. Press “Pass” to continue.
V. You will see the LCD display greychart if it functions well.
VI. Press “Pass” to continue.
VII. You will see the LCD display white if it functions well.
VIII. Press “Pass” to continue.
