8
Let’s Get Started!
Installation & Assembly Instructions
Step 1:
Installation
Note:
Do not place your dehumidifier in any location that features permanent, intermittent, or risk
of standing water to prevent damage to the unit and/or any persons.
Preparation
1. Remove the budget from the unit.
2. Remove the bucket’s tank cover and take out the included accessories.
3. Put the bucket’s tank cover back on.
4. Install the bucket into the main unit.
Accessories Included
Hook Assembly
Insert the hooks as illustrated below and turn them clockwise approximately 45-degrees.
Step 2:
Testing
• Do not use outdoors.
• Place the unit on a smooth level surface.
• Allow at least 12 -18 inches of clearance on all sides of the unit.
• Place the unit in a space where the temperature will not fall below 41 degrees Fahrenheit.
• The dehumidifier must be operated in an enclosed area to be most effective, such as a basement.
• Close all doors, windows, and other outside openings to the room.
NO.
APPEARANCE
PART NAME
QUANTITY
1
Drain Pipe
(Pump Model Only)
x1
2
Hooks
x2
