TCL-IP (8) User Manual
Figure 2.2 HTTP login interface
Note: All the settings go into effect after restarting the phone.
2.1.1 Network Setting
Figure 2.3 shows the network setting and the protocol setting pages
respectively. You can set the IP address, the subnet IP, the gateway IP
and the correlating items of the protocol through these pages. While
setting the phone, you can adopt the DHCP mode for a dynamic IP
address, or set the IP by hand. If you want to adopt the DHCP mode
for an IP address, please tip the “Use DHCP” item, and then press the
“next ” key. Now the phone can get a dynamic IP address, IP subnet
and gateway IP.If you need to set the IP address, IP subnet and the
gateway IP by hand, please fill them to the corresponding item blanks.
TCL communication www.tclcomm.cn
8
