O
verview：
L
CDTV features by its small size, low weight, perfect display effects as well
as energy saving and low radiation. It can not only be used to receive TV program,
but also as PC monitor.
Note:
Factory Menu(FM) is designed for factory. R&D Menu (RDM) is for R&D purpose and
should not be changed in the process of production.
H
ow to access to Factory Menu?
1.
Firstly, in TV mode, press MUTE button of remote control to mute the set.
Secondly, press MENU button to enter user main menu. Then choose CONTRAST item in
PICTURE menu and press 9,7,3,5 buttons in series. Factory Menu will appear in the
left top of screen.
2.
Press RETURN button when FACHOTKEY is enabled (ON).
Note: After upgrading the software for the first time. Restart the set (power off
then power on) should be made to ensure the correct EEPROM data.
F
M(Factory Menu) menu
Item
Default
Description
Status
FAC HOTKEY OFF
Shortcut button to enter Factory Menu.（OFF：disable；ON：
enable），After production, the item must be disabled.
OK
WARM UP
OFF
OFF：normal mode，the set will turn to standby mode
when no signal inputted
ON：Aging mode，the set will display blue screen
when no signal inputted. Usually the value should
be set to off when aging test.
OK
ADC
Calibration of ADC data
OK
WHITE
BALANCE
White balance data adjustment
OK
SHOP
DO
Reset the set after production to remove all unnecessary
factory debug information and the Factory Menu will can
not access for users.
OK
NVM RESET
DO
Restore the system to default value. This operation
will remove the white balance data. This function
only designed for R&D.
OK
