SET FAC CH DO
Preset the channel list of factory to provide convenience
for production.
OK
Power on
LAST
STB: The set will turn to standby mode when switch on.
LAST：remember the status of last switch off.
ON: power on when switch on.
OK
PVR UPGRADE DO
OK
VERSION
Display the version of software.
OK
PVR VERSION
OK
ADC calibration：
Item
Default
Description
Status
SOURCE
Current source
OK
R OFFSET
127
R offset, manually adjustable. Should not be changed
after automatic adjustment.
OK
G OFFSET
127
G offset, manually adjustable. Should not be changed
after automatic adjustment.
OK
B OFFSET
127
B offset, manually adjustable. Should not be changed
after automatic adjustment.
OK
R GAIN
127
R gain, manually adjustable. Should not be changed after
automatic adjustment.
OK
G GAIN
127
G gain, manually adjustable. Should not be changed after
automatic adjustment.
OK
B GAIN
127
B gain, manually adjustable. Should not be changed after
automatic adjustment.
OK
AUTO TUNE
Before calibration, first, please input
corresponding pattern according to the
instruction at the bottom of the menu. Second,
select AUTO TUNE, Then press vol- button in remote
control to calibrate ADC automatically. The result will
be displayed.
OK
WHITE BALANCE adjustment:
Item
Default
Description
Status
SOURCE
AV1
current source. Only AV1, HDTV, VGA need be
adjusted.
OK
