TCL L32F1520, Operation Manual

Initial setup

Welcome to use the Wizard for Initial Setup !!

Please press [OK] to start the wizard.

Welcome

General Operation

Initial set-up involves selecting all the settings required to 
be able to search for and store all the channels you can 
receive. Make sure that the television is switched on and 
follow all the steps in turn specified hereafter. 

The first time you switch the set on, the 

Initial setup

wizard opens, which guides you through the initial setup 
process. Press 

OK

 to start your initial setup.

1.  Press the up or down direction button to select 

Scan

     and press the 

OK

 or right direction button to start the 

     search automatically. All available TV programmes 
     are stored. This operation takes a few minutes. 
     The display shows the progress of the search and the 
     number of programs found.  
     
    

Note:

 to prevent the channel setup process from being 

    interrupted, wait for the message indicating that the 
    setup is complete. 

    In this step, you can also select 

Skip Scan

 to skip the 

    channel search progress. But when you turn the TV on 
    next time, the prompt on the screen will remind you to 
    do the channel scan first.

2. During the setup, user can follow the hints available at 
    the bottom of the screen to return to the last step by 
    pressing the left direction button. Or press 

Exit

 to exit 

    or interrupt the search halfway.

3. Once the automatic search ends, the set enters the 
    next step automatically. You can press the up or down 
    direction button to select your location 

Shop

 or 

Home

. 

    Press the 

OK

 or right direction button to confirm your 

    selection and enter the last step.

Note: 

the 

Shop 

mode does not satisfy the MEPS 

    certification, suggest selecting 

Home

.

 
4.  - In this step, you can press 

OK

 to exit the initial setup. 

       The channels are arranged in a preset order. If you 
       wish to skip channels, modify the preset order or 
       rename channels, select 

Setup > Organiser

 for these 

        operations.      
    -  In this step, you can also press the left direction 
       button to return to the previous step.

Initial

Set-up

To access the menu system: 

1. Press the 

Menu

 button to display the main menu.

2. Press the up/down/left/right direction buttons to select
    the desired item, then press the 

OK

 button to open the 

    corresponding submenu.  

3. In submenus, use the up or down direction button to 
    select menu options, use the left or right direction button 
    to set functions or change values. Use the 

OK

 button 

    to activate a setting. Use the 

OK

 or right direction button 

    to open the corresponding submenu. 

4. Press 

Menu

 to return to the previous menu or press 

Exit

 to close the menu.   

Using

Menu

System

This section explores the menus of your TV. Each menu 
is outlined and detailed to help you get the most from 
your TV. 

8

Picture

Sound

Timer

Options

Source

Media

Lock

Setup