TCL L32S60A, Operation Manual

11

3. 

Turn on the TV and wait for the common interface 

function to be activated. This may take several 

minutes.

Note: Do not remove the CAM from the slot. 

Removing the module will deactivate the 

digital services.

Accessing Common Interface Services

After inserting and activating the CAM, press 

on the 

remote control, select 

Channel > Common interface

and press 

OK/

►

 to enter.

This menu option is only available if the CAM is correctly 

inserted and activated. On-screen applications and 

content are provided by your digital TV service operator.

Note

: This feature is only available under DTV source. 

Using Subtitles

You can enable subtitles for each TV channel. 

Subtitles are broadcast via Teletext or DVB-T/DVB-C 

digital broadcasts. With digital broadcasts, you have 

the additional option of selecting a preferred subtitle 

language.

Note: Some options are avail

a

ble only when 

Subtitle

is set to 

On

. 

Turning On/Off Subtitles

1. 

Press 

on the remote control, select 

Channel > 

Subtitle

 and press 

OK/►

 to enter.

2. 

Select the 

Subtitle

 option, press 

OK/►

 to enter, 

press 

▲

/

▼

 to select 

On

 or 

Off

 and press 

OK

 to 

confirm.

3. 

Press   to close the menu.

Enabling Subtitle Languages on Digital TV 

Channels

1. 

Press 

on the remote control, select 

Channel > 

Subtitle > Digital subtitle language 1st

 and press 

OK/►

 to enter.

2. 

Press 

▲

/

▼

 to select a subtitle language as your 

preferred language and press 

OK

 to confirm.

3. 

Press 

▲

/

▼

 to select 

Digital subtitle language 2nd

and press 

OK/►

 to enter.

4. 

Press 

▲

/

▼

 to select a secondary subtitle language 

and press 

OK

 to confirm.

5. 

Press   to close the menu.

Selecting a Subtitle Type on Digital TV 

Channels

1. 

Press 

on the remote control, select 

Channel > 

Subtitle > Subtitle type

 and press 

OK/► 

to enter.

2. 

Press ▲/▼ to select a subtitle type and press OK to 

confirm. You can select 

Hearing impaired 

to display 

Installing Channels

This section describes how to search and store 

channels automatically. This may be done in any of the 

cases below:

-

you have skipped the channel installation step in the 

initial setup;

-

you are prompted that there are no channels in TV 

mode;

-

you want to update your channels.

1. 

In TV mode, press 

on the remote control and 

select 

Channel

 > 

Channel scan

. Press 

OK

/► to 

enter.

2. 

The TV installs and arranges channels according 

to your country or region. Press ▲/▼ to select 

Country/Region

, and press 

OK

/► to enter. Enter 

the default password 1234 or your own password in 

case you have changed the password in the 

System

> 

Lock 

menu. Press ▲/▼ to select your country or 

region and press 

OK

 to confirm.

3. 

Press ▲/▼ to select 

Automatic search

 and press 

OK

/► to enter.

4. 

Press ▲/▼ to select 

Tuner mode

 and press ◄/► 

to select 

Cable

, 

Antenna 

or 

Satellite

.

5. 

Press ▲/▼ to select other options and use ◄/► to 

configure.

6. 

After configuration is completed, press ▼ to select 

Search

 and press 

OK

 to start scanning channels.

7. 

The channel search may take a few minutes. After 

the automatic search, channels are arranged in a 

preset order. If you wish to hide or swap channels, 

press 

on the remote control, select 

Channel

 > 

Channel organizer

 and press 

OK

/► to enter.

Common Interface

Encrypted digital TV channels can be decoded with a 

Conditional Access Module (CAM) along with a smart 

card provided by a digital TV service operator.
The CAM may enable several digital services, 

depending on the operator and services you choose 

(for example, pay TV). Contact your digital TV service 

operator for more information about services and terms.

Using the Common Interface Function

WARNING: Switch off your TV before inserting a 

CAM. Be sure to follow the instructions described 

below. Wrong insertion of a CAM may damage both 

the module and your TV. 
1. 

Following the directions printed on the CAM, gently 

insert the module into the common interface slot on 

the TV.

2. 

Push the module in as far as it will go.

Chapter 4

Using More of Your TV