TCL LINKZONE MW42, User Manual

11

NOTE

When the SIM PIN code is entered incorrectly 3 times, a PUK code is required. 

You can obtain the PUK code from your internet service provider. 

Connection Mode

Configure whether your LINKZONE is connected to network automatically or manually.

Network Mode

Configure network selection method, and change the network mode. 
Make sure you click 

Apply

 after making desired changes.

Advanced Settings

Check the IP address, and manage DHCP and MAC settings on this tab. 
With 

DHCP Server

 enabled, the IP addresses you have defined will be assigned to the 

connected devices automatically. 
Regarding 

MAC Filter

 feature, you can specify which device can or cannot access the 

internet. 

About

Check more device information (e.g. software version, device name, and IMEI), and perform 

other basic settings on this tab.

Reboot

If the LINKZONE does not work properly, you can try restarting the 

LINKZONE to solve the problem.

NOTE

  To restart the LINKZONE, you can also press the power 

button for 10 seconds.

Reset

If you can't access the internet for unknown reasons, or forget the 

login password, you can factory reset the LINKZONE.

NOTE  

To reset the LINKZONE, you can also simultaneously press 

the power button and WPS button for 3 seconds.

Backup

Click to download the current configuration file to your local device. 

Restore

Restore the device to a previous configuration by importing the 

backup configuration file.

4.5  More

Make a WPS connection, and check for firmware update in this panel.