background image

8

Chapter 4.  Configure your LinkZone

In this chapter, we will show you how to get the most out of your LinkZone using the web UI. 

With the web UI, you can configure Wi-Fi settings, view connected devices, manage SMS 

settings, and more. 

4.1 Home

On the hone page, you can configure the basic information for your LinkZone, including 

Internet, Statistics, Advanced, DHCP, Home network and Wi-Fi settings. 

Internet

Internet allows you to view your device information including IMEI, IMSI, LAN Domain, WAN 

IP address and WAN IPv6 address.

Statistics

The internet statistics can be seen here, both for your current session and your total traffic 

for the month. You can also reset the statistics from here.
Note: These figures are only meant to be used as a guide.

Advanced

The advanced selection shows the firmware version and the signal quality data.

DHCP

DHCP allows you to view the IP address you have defined what it will be assigned to the 

connected devices automatically.

Home network

You can find how many connected devices in Wi-Fi or cable. 

Wi-Fi

The Wi-Fi network information such as SSID, max access number, MAC address and band.

4.2 Quick Settings

The wizard will show you how to set up basic parameters of gateway safety: Click 

Previous

 

or 

Next

 to navigate, and click 

Apply

 to save settings. For advanced parameters, set them in 

other menu.

Network Name (SSID)

SSID is the name of the Wi-Fi network. 

SSID Broadcast

This function is enabled by default. 
When this function is disabled, other users cannot detect the SSID 

or the Wi-Fi name. They need to manually enter SSID to connect 

to your LinkZone network.

Summary of Contents for LinkZone






















Reviews: