background image

15

Important safety information

Read all the safety information before using your product. Failure to follow these safety 

instructions could result in injury, or damage to your product or other property.

Important safety instructions 

• 

Do not use the device in areas where wireless devices are prohibited.

• 

Do not let children use the device and its accessories without supervision.

• 

Always handle your device with care, and keep it in a clean and dust-free place.

• 

Do not attempt to repair the device yourself.

• 

Do not drop, throw, or bend your device.

• 

Do not dispose of the device and its accessories in a fire. 

Medical device interference 

Your router contains components which may interfere with medical devices such as 

pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation 

between your medical device and your router. Consult your physician and medical device 

manufacturer for information specific to your medical device.

Power adapter 

Charge your device with the supplied USB cable. Only charge with an adapter that is 

compliant with the applicable international and regional safety standards. The adapter shall 

be CE-approved. Using other adapters could cause damage to the device or pose a risk of 

injury or death. Keep the adapter in a well-ventilated area when it is plugged into an electrical 

outlet. Don’t use damaged power adapters. 

Battery

CAUTION 

 Risk of explosion if battery is replaced by an incorrect type. Dispose of used 

batteries according to the instructions.
In accordance with air regulations, the battery of your product is not fully charged. Please 

charge it first. 

• 

Do not attempt to open the battery (due to the risk of toxic fumes and burns). 

• 

Do not puncture, disassemble, or short circuit the battery.

• 

The battery must be recycled or disposed of separately from household waste. Dispose of 

batteries according to your local environmental laws and guidelines.

• 

Replace the battery only with another qualified battery. Use of an unqualified battery may 

present a risk of fire, explosion, leakage, or other hazard.

Summary of Contents for LinkZone






















Reviews: