TCL LinkZone, User Manual

9

Security Mode

The available security modes include 

OPEN

, 

WPA2-PSK(AES)

and 

WPA/WPA2-PSK(TKIP/AES)

.

Pass Phrase

Set a password for your Wi-Fi network.

4.3 Devices Settings

Connected devices

Click 

Connected Devices

 to get more detailed information on the connected devices. In the 

details page, you can edit the names of connected devices, and manage internet access for 

connected devices.  

Advanced Settings

DHCP

Dynamic Host Configuration Protocol (DHCP) is a client or server 

protocol that automatically provides you with an Internet Protocol 

(IP) host. With 

DHCP Server

 enabled, the IP address and subnet 

mask you have defined will be assigned to the connected devices 

automatically. 

USSD

Enter the USSD code and click Send. Call your operator to get the 

command code.

PIN Management

Enable SIM PIN:
1. When the SIM PIN feature is disabled, click 

Enable

.

2. Set an SIM PIN code that is 4 to 8 digits long.
3. Click 

Apply

.

Disable SIM PIN:
1. When the SIM PIN feature is enabled, click 

Disable

.

2. Enter the current SIM PIN code.
3. Click 

Apply

.

NOTE: When the SIM PIN code is entered incorrectly 3 times, a PUK 

code is required. You can obtain the PUK code by calling customer 

services on 150 using your SIM card.

L2TP

L2TP (Layer Two Tunneling Protocol) is a virtual tunneling protocol 

commonly used in virtual private networks. It provides packet-oriented 

point-to-point connections.

Hibernation

Enter the time interval and click 

Apply

. The device will go to sleep and 

work in low power. You can wake it up by any action in connection.

Connection Settings

Network Selection

You can set the network mode to 

Automatic

, 

3G only

, 

4G only

 or 

4G/3G only

. Make sure that 

you click 

Apply

 after making any changes.