第
3
页共
11
页
4-WHITE BALANCE
White Balance data adjustment（refer
as follow）
The balance data is set by PE before
the mass production. Do not need
adjust.
OK
5-SHOP
DO
Reset the set after production
alignment;(This
operation
will
remove all unnecessary factory value;
The factory hotkey will be turn off)
OK
6-NVM reset
DO
System initialization. Restore all
data except the White Balance and ADC
data ;Only for R&D.
OK
7-SET FAC CH
DO
Preset specific factory channels for
specific factory. Press left and
right button to select the factory,
and then press OK to confirm.
OK
8-POWER ON
LAST
ON: Always turns on TV when AC power
on
STB：Always goes to standby mode when
AC power on
LAST：Restore the status before the
last AC power off
OK
9-USB UPDATE
USB update，
（refer as follow）
OK
10
ReloadEFBItem…
This item only factory used，
Note: Below the factory menu, some model information are showed, including
software version, Project Name, SIACP Version, and SW release time.
ADC Submenu:
ITEMS
Default
Setting
Description
Status
Source
RGB/YPbP
r
(HD)
Sources need calibration. RGB means PC and
YPbPr(HD) means YPbPr
OK
R-GAIN
4478
R-GAIN
OK
G-GAIN
4478
R-GAIN
OK
B-GAIN
4478
R-GAIN
OK
R-OFFSET 2048
B-OFFSET
OK
G-OFFSET 2048
B-OFFSET
OK
