47
After 15 mins of no signal
– If no signal is detected on a TV input for 15 minutes, the TV
automatically powers off.
After 4 hours of no interaction
– If no remote control or panel button is pressed for 4 hours and
the TV is not displaying a TV signal or streaming a video, the TV is automatically powered off.
Configure parental controls
Parental controls enable you to control whether the members of your household can view certain kinds
of broadcast TV programs. When a program or feature is blocked, you can unblock it by entering a
parental control PIN that only you know.
Note
:
The parental control feature does not block streaming videos or content from inputs other
than Antenna TV.
Creating a parental control PIN
The first time you access the
Parental controls
screen, you must create a new parental control PIN.
Thereafter, whenever you want to change parental control settings, unblock programming that has been
blocked, change the PIN, or disable parental controls, you must enter your parental control PIN.
Tip
:
Your parental control PIN has nothing to do with your Roku PIN. You can make them the
same if you want—this is entirely your choice.
To create a new parental control PIN, from the
Home
screen menu navigate to
Settings > Parental
controls
. The screen displays a numeric keypad. Use the arrow buttons and the
OK
button to enter a
four digit code. Then repeat the process to enter the same PIN again, just to make sure you correctly
entered the PIN you want to use.
Important
:
If you forget your PIN, the only way to recover is to perform a factory reset
operation, as explained in
. Be sure to write it down in a
safe place just in case.
Blocking Movie Store, TV Store, and News
One of the parental control options is to completely hide the entertainment options that are available
directly on the
Home
screen menu.
To hide
Home
screen entertainment options:
1.
From the
Home
screen menu, navigate to
Settings > Parental controls
, and then enter your PIN.
2.
In the
Parental controls
screen, highlight
Home screen
and then select or clear either of these
options: