39
Setting up Antenna TV
In addition to the other entertainment possibilities of your TCL Roku TV, you may also want to watch
broadcast channels from an antenna or cable TV service connected to the ANT input. On your TCL Roku
TV, you watch broadcast TV in much the same way you watch other entertainment choices. You select a
tile—in this case, the
Antenna TV
tile—from the Home screen.
The first time you select the
Antenna TV
tile, you have to set up the TV tuner. Setting up the TV tuner
scans for active channels and adds them to your Antenna TV channel list.
Why do I have to set up the TV tuner?
Not everyone needs to use the TV tuner. For example, you might have a set top box provided by a cable or satellite
company that receives all of your channels. Most of these set top boxes use an HDMI
®
connection.
More and more people are watching only streaming TV and do not have a TV antenna or cable/satellite service. If
you don’t need the TV tuner, you can bypass setting it up and instead remove it from the Home screen as
explained in
Remove unwanted tiles
.
When you set up Antenna TV, the TV scans the signals on its antenna input for channels with a good signal, and
adds those to the channel list, skipping dead channels and channels with a very weak signal.
The TV lets you add two analog channels, even if they have no signal, for the purpose of using an older set top box,
VCR, or game console that can only output a signal on analog channel 3 or 4. Typically, you’ll only need one of
these channels, but both are provided to make setup simpler. You can hide the one you don’t want as explained in
Edit Antenna TV channel lineup
.
Summary of Contents for Roku TV 8 Series
Page 10: ......
