Test and Alignment Specification for RT2841 Series (v0.01).docx
Page 12 of 27
Ensure that TV’s picture enhance is off.
Ensure that TV is in
Factory mode to access to”
White Balance
” adjustment submenu
.
WB Normal is the first mode which is adjusted in HDMI source
，
the next are HDMI warm and cool mode.
Warm
and
Cool
Tone are relatives to
Normal
mode. WB adjust need to fix default G Gain .Offset registers needn’t
to be adjusted.
“
Gain
” registers set need to be adjusted at 70IRE.
Note: The operation must enable factory “P” mode
￭
Automatic Gamma correction
Gamma correction, or often simply gamma, is the name of a nonlinear operation used to encode and decode
luminance or tristimulus values in video or still image systems.
You need adjust 4+3 gamma for different samples based on the color coordinates and target gamma offered by PQ
engineer. So each sample can get almost the same effect as PQ golden sample. The 4+3 gamma include 4 gamma
based on 4 different color temperature (cool, normal, warm1, warm2) and 3 gamma related to SDR to HDR (cool,
normal, warm).
For the automatic gamma correction, we can do as below, but please refer to
“Gamma correction specification
(v1.00)”
for detail.
▪Initialize the picture, turn off dynamic backlight, dynamic contrast, and set picture mode as computer desktop
mode;
▪
Get the color coordinates (x, y, Y) and target gamma in the PDM of the target model;
▪
Open the factory menu of TV, Open the tools
SIACP
and
main.vi
on the PC, connect the equipment correctly
(CA310, serial port, PC, TV);
▪ Fill the color coordinates (x, y, Y) target gamma, error range and time-delay in the main.vi tool that made by AOE,
and save it;
Summary of Contents for RT41VS-EU
