5
15 Key
game
(other
adjustment)
OSD1(30)
OSDF1(66)
OSD2(48)
OSDF2(75)
HAFC(09)
NOIS(01)
UCOM(00)
----------
(all use default value)
16 Key
0
(White
balance
adjustment)
R CUT (80)
G CUT (80)
B CUT (80)
G DRV (40)
B DRV (40)
Black and white
pattern (PAL)
1. Measure the dark side of the picture with
a color analyzer and set RCUT to 80.
Then adjust BCUT and GCUT until the
data on the analyzer become x = 284, y =
299.
2. Measure the bright side of the picture,
Then adjust BDRV and GDRV until the
data on the analyzer become x = 284, y =
299.
3. Repeat step 1 and 2 until you get right
color on both dark and bright side of the
screen.
System data:
Item
Adjust item
Default value
Key6 OPT
FLG0
FLG1
STBY
HD-DELAY
MODE0
MODE1
MODE2
FACTORY-OUT SETUP
：
In D-MODE, press
RECALL
button to initialize to the FACTORY-OUT
status.
AGING MODE: In D-MODE, press
OK
button to entry AGING MODE.
EEPROM INITIALZATION: In D-MODE, press “
0752
” to initialize EEPROM.
NOTICE: Before to be released, any M113 chassis must be initialized to the FACTORY-OUT status.
Don’t try to initialize EEPROM, unless software can’t work normally.
