background image

EN

1

English

Important information

Safety

Ensure that your domestic mains supply voltage 

matches the voltage indicated on the identification 

sticker located at the back of your set. Where the 

mains plug or an appliance coupler is used as 

disconnect device, it shall remain readily operable.

On certain models, the light indicator is located at the 

side of the TV set. The absence of a light indication 

at the front does not mean that the TV set is fully 

disconnected from the mains. To disconnect the TV 

set completely, the mains plug must be pulled out.

The TV set’s components are sensitive to heat. The 

maximum ambient temperature

 should not exceed 

35º

 Celsius. Do not cover the vents at the back or 

sides of the TV set. Leave sufficient space around 

it to allow adequate ventilation. Install the appliance 

away from any source of heat (fireplace, etc.) or 

appliances creating strong magnetic or electric fields.

Moisture

 in rooms where the set is installed should 

not exceed 

80%

 humidity. Moving the set from a cold 

place to a warm one can cause condensation on the 

screen (and on some components inside the TV set). 

Let the condensation evaporate before switching the 

TV set on again.

WARNINGS 

This appliance is intended for domestic household 

use only and should not be used for any other 

application, such as for non-domestic use or in a 

commercial environment.

If the external flexible cable or cord of this product is 

damaged, it shall be replaced by the manufacturer or 

his service agent or a similar qualified person in order 

to avoid a hazard.

Leave more than 10cm clearance around the 

television to allow adequate ventilation. The 

ventilation should not be impeded by covering the 

ventilation openings with items, such as newspapers, 

table-cloths, curtains, etc.

The apparatus shall not be exposed to dripping or 

splashing and no objects filled with liquids, such as 

vases shall be placed on the apparatus.

Batteries shall not be exposed to excessive heat such 

as sunshine, fire or the like.

An apparatus with CLASS I construction shall be 

connected to a MAINS socket outlet with a protective 

earthing connection.

To prevent the spread of fire, keep candles or 

other open flames away from this product at all 

times.

WARNING: To prevent injury, this apparatus must be 

securely attached to the floor/wall in accordance with 

the installation instructions.

CAUTION: 

Connect headphones with the volume 

set low and increase if required. Prolonged listening 

through headphones at high volume settings can 

result in hearing damage.

Eye Fatigue

When using this product as a computer monitor, 

health and safety experts recommend short frequent 

breaks rather than occasional longer breaks. For 

example a 5-10 minute break after an hour of 

continuous screen work is considered to be better 

than a 15 minute break every 2 hours.

Do not use the monitor against a bright background or 

where sunlight or other bright light sources will shine 

directly onto the screen.

The   or 

POWER/

 button on the TV set or the   

button on the remote control can be used to switch it 

on and put it into standby mode. If you are 

not going 

to be watching the TV for a lengthy period of time

switch it off completely by removing the plug from the 

mains power socket.

During 

thunderstorms

, we recommend that you 

disconnect the TV set from the mains and aerial so 

that it is not affected by electrical or electromagnetic 

surges that could damage it. For this reason, keep 

the 

mains and aerial sockets

 accessible so they can 

be 

disconnected

, if necessary.

Unplug

 the TV set immediately if you notice it giving 

off a 

smell of burning

 or 

smoke

. You must never, 

under any circumstances, open the TV set yourself, 

as you run the risk of an 

electric shock

 in doing so.

TV screen

The TV screen used in this product is made of glass. 

Therefore, it can break when the product is dropped 

or impacted upon by other objects.

The TV screen is a very high technology product, 

giving you finely detailed pictures. Occasionally, a few 

nonactive pixels may appear on the screen as a fixed 

point of blue, green or red. This does not affect the 

performance of your product.

Care

Use a glass-cleaning product to clean the screen and 

a soft cloth and mild detergent to clean the rest of the 

set.

Important: 

Using strong detergents, alcohol-based 

and abrasive products may damage the screen.

Dust the vents at the back and sides regularly. Using 

solvents, abrasive or alcohol-based products could 

damage the TV set. If an object or liquid enters the 

appliance, unplug it immediately and have it checked 

by an authorized engineer. Never open the appliance 

yourself since this may put you at risk or damage the 

appliance.

Hanging the TV set on the wall

Warning: This operation requires two people.

To ensure a safe installation, observe the following 

safety notes: 

• 

Check that the wall can support the weight of the TV 

set and wall mount assembly.

• 

Follow the mounting instructions provided with the 

wall mount. For certain models, make sure to screw 

Summary of Contents for U55S6806S
























Reviews: