L2E Repair Document
TCL
Communication Ltd.
Rev.
VFD 700 Level 2 Enhance Repair Document
Page
1.0
34/77
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
2). About battery disassemble notice:
When exchange battery, the Furnished battery steel should be exchanged together.
So the Furnished battery steel should be ordered with battery.
3). Put all the spare parts on right position (don’t let all the spare parts mixed and put on the
clean place to avoid vitiated or stained for each spare part) after disassembly.
5.4 Reassembly Process
Please make reference to the disassembly process for assembly reverse an order of the disassembly
steps.
Attention:
Make sure the main camera and sub camera is assembled correctly on PCBA, do not mix them;
Assemble Audio module and USB connector first before assemble PCBA;
Don’t forget to paste the main camera shielding con tape on the new one when you exchange it.
Make sure the MIC rubbers, receiver, side key FPC and P sensor rubber are assembled correctly.
