FOR UK USE ONLY
1.
This product is supplied with a 13 A plug conforming to BS 1363 fitted to the
mains lead. If the plug is unsuitable for your socket outlets, it needs to be
replaced. Please note the following: If the plug is a non-rewireable one, cut it
from the mains lead and immediately dispose of it. Never insert it
into a socket outlet as there is a very great risk of an
electric shock.
2.
The replacement of the plug at the mains lead has to be
done according to the following instructions:
IIm
mp
po
orrtta
an
ntt:: The wires in this mains lead are coloured in
accordance with the following code:
blue = Neutral
brown = Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
– the wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black,
– the wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
Do not connect any wire to the terminal which is marked with the letter E or
by the earth symbol
, or coloured
green or green and yellow.
3.
If a 13 A (BS 1363) plug is used it must be fitted with a 3 A fuse conforming to
BS 1362 and be ASTA approved. If any other type of plug is used, the appli-
ance must be protected by a 5 A fuse either in the plug or adapter or at the
distribution board.
If in doubt - consult a qualified electrician.
4.
Never use the plug without closing the fuse cover.
56
