5
3. TCP Smart radiator Installation
3.1. Mounting
The product works by means of natural air convection
(Figure 1). In order to achieve optimal functioning
and an even distribution of heat, the lower part of the
product, once mounted on the wall, must be at least
10-12cm from the floor, and 30cm at the most. As for
the sides and above, a minimum distance of between
10-12cm must be left from any wall or brickwork in
order for it to function correctly (Figure 2).
3.2. Fixing the supports
Inside the packaging you will find a fixing kit. Please find the instructions below:
1. Choose the right part of
the wall.
2. Place the mounting stencil
on the wall, marking the places
for the holes.
3. Remove the stencil and
make the holes in the wall.
4. Fix the supports using the
plugs and screws provided,
or others suitable for the wall
type.
5. Check the correct position-
ing of the lower support.
6. Align the product with the
top supports.
7. Place the product in the
supports.
