16
03/2013
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
Subject to technical changes.
PI_FBI6110-uk 2 A
Video sources
By entering the data in this table, video sources to specifically switch on the connected
video cameras are created (max. 16).
Enter a camera name. The
name appears in the camera
selection list.
Confirm with the
Save
button,
the settings are stored.
The button
Reset
resets the
content to the last stored
state. No reload to factory
setting is realised.
Parameter
Explanation
name
Name of the camera, as it should be shown in the camera selection
list.
AS address
AS address of the camera to realise a switch-over via the VSW04 or
FVU1220. The AS address is permanently assigned to the button.
Each AS address in the range from 0 to 63 can be assigned only
once.
indication
To activate or deactivate the display of the camera in the camera se-
lection list (menu
Live transmission
).
image storage
To activate or deactivate die automatic image storage in case of door
calls.
