03/2013
9
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
Subject to technical changes.
PI_FBI6110-uk 2 A
Settings
Reload factory settings
!
When reset to factory settings, only the IP settings and passwords are reset to factory
setting.
If the adjusted IP address or the administrator password is not known, the device can be
reset to factory settings:
IP address:
192.168.1.201
subnet mask:
255.255.255.0
user:
admin
password:
1234
LED, lights up green
LED, blinks green
LED, blinks fast green
LED, lights up green
press push button
reset
to factory setting
and
keep it pressed
…
keep push button
reset
to factory setting
pressed
…
…, until the LED blinks
fast, then release it
device is reset to factory
settings
Start browser: establish a connection PC
– IP Video Streamer
Prepare the network connection
The PC/Laptop must be equipped with a network connection and it must be located in the
same subnet as the Video Streamer. If your network and the Video Streamer are working
within the 192.168.1 address area (C net), you have direct access to the Video Streamer
(provided that this IP address is not used by another device).
Otherwise, the used PC/laptop has to be switched temporarily to an IP address within the
address area of the FBI6110 in order to establish a connection with the Video Streamer.
To establish/ adjust your network connection, please use the network installation assistant
or the help function of your operating system, keyword:
set up network
.
If several FBI6110 (in delivery state) are to be installed within one network, the devices
have to be commissioned one after another and a free IP address has to be assigned.
To set up the network connection, you may need administrator rights.
In delivery state, the following is preset at FBI6110:
IP address: 192.168.1.201
subnet mask: 255.255.255.0
user: admin
password: 1234
