4
Safety instructions
General safety regulations
Assembly, installation, commissioning and repair of electronic devices must be carried out by qualified
electricians.
Observe the latest regulations and standards for system installations.
WARNING! Danger to life due to electric shock
Observe the safety regulations according to DIN VDE 0100, when working on main power connections of
230 V.
When installing TCS:BUS systems the general safety regulations for telecommunication systems ac-
cording to VDE 0800 must be observed. Inter alia:
separated cable routing of high and low voltage lines,
minimum distance of 10 cm in case of a common cable routing,
use of separators between high and low voltage lines within shared cable ducts,
use of standard telecommunication lines, e.g. J-Y (St) Y with 0.8 mm diameter,
already existing lines (modernisation) with deviating cross-sections can be used in compliance with
the loop resistance.
requirements to protect against lightning
ATTEN-
TION!
Device damage due to overvoltage.
By suitable lightning protection measures it has to be ensured that the electric voltage of 32 V DC at each
connection is not to be exceeded.
Note for video surveillance according to DIN 33450
Creating and saving video recordings can infringe personal rights.
Observe the current regulations and labelling requirements when installing and operating video com-
ponents.
