6
Device overview
1
connection terminals a, b, P, M, V1 and V2
6
WEL button (reset of network settings and passwords)
2
matching resistor (jumper for video IN)
7
button reset (device restart)
3
type label
8
LED red (error indication TCS:BUS)
4
SD card (not enclosed in the delivery)
9
LED yellow (error indication network and SD card
5
RJ45 socket with status LED (network connection)
10
LED green (indication for operational readiness)
Indication and operating elements
LED green
OFF:
ON:
BLINKS (slowly, 1 Hz):
BLINKS (fast, 4 Hz):
device is out of service
operational readiness (the start process of the FBI6119-0400 is
finished)
WEL button is pressed (0 to 8 seconds)
network settings and password will be reset (press the WEL
button for 8 seconds)
LED yellow (error indi-
cation network)
ON:
BLINKS (slowly, 1 Hz):
BLINKS (fast, 4 Hz):
OFF:
start process of the device
error in the network
error SD card (unreadable)
no error in the network or with SD card
LED red (error indica-
tion TCS:BUS)
ON:
BLINKS (slowly, 1Hz):
OFF:
firmware update is updated
error in TCS:BUS
no error in TCS:BUS
