9
Connecting the lines
Connecting lines
connection terminals:
acceptable cross section (diameter)
0.08 … 0.82 mm
2
(Ø 0.32 … 1.0 mm)
max. number of wires per terminal contact
2 x 0.8 mm, 3 x 0.6 mm
Connect further wires by using auxiliary terminals.
Use only connecting lines made of the same material and with the same diameter within one terminal
contact.
network connection:
patch cable RJ45
CAT.5e FTP 8-pin
Connecting the lines
►
Strip the lines.
►
Connect the lines (a, b, P, M, V1 and V2) according to the labelling
(1) (ill. 4).
►
Fix the lines by using the slot screwdriver (enclosed in the deliv-
ery).
►
Connect the RJ45 interface at the FBI6119-0400 and your network
by using a patch cable (2).
Observe the example circuit on page 10.
Fig. 4: type label
Fig. 5: Connecting the lines
