7
Appendices
- 43 -
Terminal care
Maintaining your terminal
•
Don’t place it on a magnetized pad — this will cause it to malfunction.
•
Routinely clean it with a damp cloth so that spills don’t get into the inner workings.
•
Use TD-approved cleaning cards for the chip and magnetic card readers.
Storing your terminal
•
It must be stored in temperatures between 0° and 50° Celsius.
•
Do not leave it outdoors overnight, especially in the winter.
Charging your terminal (HSPA and WiFi)
At the end of the day, it’s a good idea to do a quick inspection of the terminal to ensure that it will be ready for
the next shift.
Charging your HSPA or WiFi terminal
1.
Ensure that the battery has sufficient charge, or that it’s charging if the battery
icon turns red like this:
2.
When recharging the terminal, ensure that:
•
the charging cord is fully inserted into the back of the terminal
OR
•
ensure the terminal is sitting properly in the charging base
3.
When the terminal is charging, you will see an icon in the top-right corner like this:
Changing the paper
1.
Press the
paper chamber button
on the top-left corner of the terminal to open the panel and remove
the empty paper roll tube.
2.
Unwrap a new paper roll and place it in the paper chamber so that the loose end of the paper feeds
up from under the paper roll towards you.
3.
Press down on the panel until it clicks shut and ensure there is a bit of paper sticking out from the
chamber that it touches the top of the terminal screen.
