9
Attach Rear Wheels
10
Rear Axle
7
8
9
Vehicle
connector
Motor
connector
7
8
9
8
9
10
Remove all the parts from the rear axle. Turn the vehicle body
downside up.
1. Insert the Rear Axle into the hole located on the rear of the vehicle.
2. Slide a Gear Box (7) onto the rear axle, and plug the connector on
the vehicle into the connector on the motor.
3. Slide a Rear wheel (8) onto the rear axle.
4. Slide a Ø8 washer (9) onto the rear axle.
5. Tighten a Lock nut (10) to the end of the rear axle with a spanner
(12).
7. Slide a Ø8 washer (9) onto the rear axle.
8. Slide a Rear wheel (8) onto the rear axle
9. Slide another Ø8 washer (9) onto the rear axle.
4. Slide a Ø8 washer (9) onto the rear axle.
5. Tighten a Lock nut (10) to the end of the rear axle with a spanner
(12).
HINT: An extra spanner has been provided to hold the Lock Nut on the
other side of the rear alxe while tightening the Lock Nut on the other side.
