21
7. Setup of router for TDC IP Telephony
This section is only for customers who have ordered IP Scale or Ekstrakanal with
QoS.
The cables from your equipment must be connected to different LAN ports on
the router, depending on the profile that you have chosen for the router. The
router profile chosen appears from the ‘Specifikation’ (specification) section on
your order confirmation.
The overview below shows you where the equipment is to be located in the
router.
Profile
number
LAN Port 1
LAN Port 2
LAN Port 3
LAN Port 4
1
Internet
IP telephony
IP telephony
IP telephony
2
Internet
VLAN
1)
IP telephony
IP telephony
3
Internet
Own MPLS network
IP telephony
IP telephony
4
Internet
Own MPLS network
VLAN
1)
IP telephony
5
IP telephony
Own MPLS network
IP telephony
IP telephony
6
IP telephony
Own MPLS network
VLAN
1)
IP telephony
7
Internet
Internet/MPLS
2)
VLAN
1)
IP telephony
8
IP telephony
IP telephony
IP telephony
IP telephony
9
IP telephony
IP telephony
IP telephony
Transparent
3)
1) Equipment that is to have access to IP telephony is tagged with VLAN 10, whereas equipment with
Internet access must be tagged with VLAN 1.
If you have purchased a managed TDC IP Telephony Scale switch, this will be the port connected to
the switch.
2) All traffic toward IP addresses apart from RFC1918 is routed via the Internet. Traffic toward
RFC1918 addresses is routed via the MPLS network. The following IP addresses are RFC1918,
also called private IP addresses: 10.0.0.0 – 10.255.255.255, 172.16.0.0 – 172.31.255.255 and
192.168.0.0 – 192.168.255.255.
3) Own router or managed firewall can be connected directly to this port. Assumes an extra data
channel.
