TDI-Dynaload Division
WCL488 Series Water Cooled Electronic Loads
Operation & Programming Manual
402828, Rev. B1
Page 55
WF OFF
Set Square Wave pulsing off
Pulsing Level Parameters
AV1 <NR2>
Set Amps/Volt pulse base level
AV1?
Read Amps/Volt pulse base setting
AV2 <NR2>
Set Amps/Volt pulse peak level
AV2?
Read Amps/Volt pulse peak setting
I1 <NR2>
Set Constant Current pulse base level
I1?
Read Constant Current pulse base setting
I2 <NR2>
Set Constant Current pulse peak level
I2?
Read Constant Current pulse peak setting
P1 <NR2>
Set Constant Power pulse base level
P1?
Read Constant Power pulse base setting
P2 <NR2>
Set Constant Power pulse peak level
P2?
Read Constant Power pulse peak setting
R1 <NR2>
Set Constant Resistance pulse base level
R1?
Read Constant Resistance pulse base setting
R2 <NR2>
Set Constant Resistance pulse peak level
R2?
Read Constant Resistance pulse peak setting
V1 <NR2>
Set Constant Voltage pulse base level
V1?
Read Constant Voltage pulse base level
V2 <NR2>
Set Constant Voltage pulse peak level
V2?
Read Constant Voltage pulse peak level
Readbacks
I?
Read Current
P?
Read Power
V?
Read Voltage
Slew Rate Commands
SF
Set for Fast Slew rates
SR <NR2>
Set Slew Rate
SR?
Read Slew Rate settings
SS
Set for Slow Slew rates