4/22
TDK-Lambda
CUS600M
INSTRUCTION MANUAL
NOTE
Take note that traces of sheet metal processing be left in our power supplies.
When disposing product, follow disposal laws of each municipality.
Published EMI (CE, RE) or immunity is the result when measured in our standard measurement conditions and might not satisfy
specification when mounted and wired inside end-user equipment. Use the product after sufficiently evaluating at actual end-user
equipment.
When exporting our products, apply for necessary permissions as required by rules and regulations of Foreign Exchange and Foreign
Trade Control Act.
Catalogue, contents of the instruction manual may be changed without a prior notice. Refer to latest catalogue or instruction manual.
Reproduction or reprinting the instruction manual or its portion is forbidden without our permission.
LONG-TERM STORAGE METHOD AND LONG-TERM STORAGE PERIOD
Please keep the product in carton box.
Please do not apply excessive vibration, shock or mechanical stress applied directly to the product.
Please keep away from direct sunlight.
For long-term storage temperature and humidity, the following conditions shall be used as a guideline:
Temperature range : 5
℃~
30
℃
Humidity range : 40%
~
60%RH
Please keep away from the places where temperature and humidity can change drastically. It can cause condensation on the product or
deterioration.
For long-term storage period, we recommend to use within 2 years after receiving the product.
< Soldering and PCB mounted products: On Board, Power Module and etc >
For products that have been received for more than 1 year, please check lead oxidation and solderability.
In addition, SMD type products may have MSL (Moisture Sensitivity Level) provision.
Please be sure to read the instruction manual and delivery specifications.
< Unit type or PCB type of products: the product is used an aluminum electrolytic capacitor >
There is tendency that the leakage current of an aluminum electrolytic capacitor may increase when stored without using
for a long time. This phenomenon can be improved by applying voltage to the aluminum electrolytic capacitor to reduce the
increased leakage current through the self-recovery effect of the electrolyte. For reference, before using products that have
been stored for a very long time, please warm-up first for 30 minutes or more without taking load.
< Criterion of warm up voltage condition >
(1) Implementation period: 1 year or above after the delivery.
(2) Electrical continuity condition.
Input voltage: Rating.
Load: 0A.
Ambient temperature: Normal temperature.
Time: 30 minutes or more.