INSTRUCTION MANUAL
EZA2500FC
TDK-Lambda
<Page>
12
.
Mounting
Please install reliable using M4 tap 8 places of the bottom of chassis (see below circle).
The maximum allowable penetration of mounting screws is 6mm.
Converter Bottom View
19/23
Warning
When installing EZA2500, load the body on the chassis base side.
Don
’
t load of the body only by the side brackets for rack mount.
That would damage the bracket and chassis.
Use the bracket only for positioning and fixing when installing the body in the 19 inches rack.
When removing the bracket, remove 2 screws fixing a bracket on a chassis.
Removal of a Bracket for Rack Mount