15
Pairing Guide
Although limited in its scope, this section aims to provide assistance on
configuring popular Bluetooth devices for use with your Palm/blueM. Please refer
to our website (
As a general rule all Bluetooth devices follow the same steps to interoperate. Firstly
you need to ensure the Bluetooth devices are discoverable and secondly, that they
are paired to establish a permanent relationship. Note, these steps will vary from
device to device so always refer to the equipment user manual for advice.
Please select the required device:
•
Nokia 6210
•
•
Nokia 6210
The Nokia 6210 is permanently discoverable so you merely need to configure the
Palm/blue5 to perform a search.
1 On your Palm/blueM, within the Bluetooth page of Preferences, tap
Add
device
.
2 Set the
Search for
option to
Phones
and tap
Search…
3 Select your Nokia phone from the list of devices found and tap
OK
.
4 During the connection process you will be asked to type the preset pass-
key indicated on a label supplied with the Connectivity Battery. Enter this
passkey when requested by your Palm/blueM.
5 The next step is to select a Service. On your Palm/blueM, select
Dial-up
networking
(for Internet connections) and tap
OK
.
Your Nokia phone and Palm/blueM are now Paired and set as a default.
You may need to check that your 6210 is upgraded to the latest revision in order
to use the Bluetooth Connectivity Battery. You can do this in two ways:
• Switch on the phone with the Connectivity Battery fitted. If there is an icon
in the top left corner showing a dot with waves radiating from it - ((•)) - then
the phone has a sufficient version of software.
• From the standby screen (when not in a call), type
*
#0000#
and note the
version number displayed. If it is V 05.02 or higher then the phone has a
sufficient version of software.
If your phone has an earlier software version, you can get a free upgrade from your
local Nokia dealer.