11
HotSync over Bluetooth (BlueSync™)
To BlueSync™ your blueM to your PC, you need to follow the following setup
procedure on your PC and your Palm.
Note: This section assumes that you have successfully paired your Palm/blueM
with your PC.
On your PC:
(Using TDK USB & PC Card Bluetooth Solutions)
Note: If you are using an alternative Bluetooth Connectivity Solution,
please refer to its user manual about Pairing devices and enabling Serial
Port Services for third party devices - then go straight to step 3.
1 From the
Bluetooth Neighborhood
, double click
Local Device
.
2 Right-click Bluetooth Serial Port and select Properties. Make a note of the
COM Port number (for example COM5).
3 Locate the
HotSync Manager
icon
on the taskbar of your Windows
desktop (usually in the lower right hand corner of the screen).
4 Right-click on the icon and choose
Setu
p.
5 Select
Local
and change the
Serial Port
setting to match the Bluetooth
enabled COM Port number
6 Click
OK
to accept the change.
On your Palm:
1 Launch the
HotSync
application
(tap the
button and locate
HotSync
).
2 Ensure the
Local
option is
selected.
3 Select the Bluetooth (Serial)
option. Your Palm should now be
ready to perform a BlueSync ™
session – tap the HotSync logo
to commence.