13
The blueM button
The button is the only external control on your blueM, everything else is controlled via
software. What the button does when it is pressed is up to you:
To program the button
2 Select the
Buttons
page (tap the
in the top right corner and select
But-
tons
).
3 Tap the
HotSync…
button and then tap the
next to the
Modem
item.
4 A list of all applications on your Palm will be displayed, select the one that
you want to run whenever the button is pressed (it is normally set to
HotSync
).
5 Tap
OK
and then press the bluem button to test your new setting.
The blue indicator
The button also contains a blue indicator that shows the current Bluetooth status:
• Off
– No Bluetooth activity
• Rapid flashing
– Connecting to other Bluetooth devices or sending/receiving
data
• One flash every 4 seconds
– Bluetooth link is active
blueM button
and indicator