SW-000103
Document Number: SW-000103
Page 51 of 51
Revision: 1.1
This information furnished by InvenSense, Inc. (“InvenSense”) is believed to be accurate and reliable. However, no responsibility is assumed by
InvenSense for its use, or for any infringements of patents or other rights of third parties that may result from its use. Specifications are subject
to change without notice. InvenSense reserves the right to make changes to this product, including its circuits and software, in order to improve
its design and/or performance, without prior notice. InvenSense makes no warranties, neither expressed nor implied, regarding the information
and specifications contained in this document. InvenSense assumes no responsibility for any claims or damages arising from information
contained in this document, or from the use of products and services detailed therein. This includes, but is not limited to, claims or damages
based on the infringement of patents, copyrights, mask work and/or other intellectual property rights.
Certain intellectual property owned by InvenSense and described in this document is patent protected. No license is granted by implication or
otherwise under any patent or patent rights of InvenSense. This publication supersedes and replaces all information previously supplied.
Trademarks that are registered trademarks are the property of their respective companies. InvenSense sensors should not be used or sold in the
development, storage, production or utilization of any conventional or mass-destructive weapons or for any other weapons or life threatening
applications, as well as in any other life critical applications such as medical equipment, transportation, aerospace and nuclear instruments,
undersea equipment, power plant equipment, disaster prevention and crime prevention equipment.
©2020 InvenSense. All rights reserved. InvenSense, MotionTracking, MotionProcessing, MotionProcessor, MotionFusion, MotionApps, DMP,
AAR, and the InvenSense logo are trademarks of InvenSense, Inc. The TDK logo is a trademark of TDK Corporation. Other company and product
names may be trademarks of the respective companies with which they are associated.
©2020 InvenSense. All rights reserved.
