Data Sheet
5
Gigabit Ethernet, 850 nm,
multimode, VCSEL, 0.55 km
(0.3 mi)
5H Gigabit Ethernet, industrially
hardened, 850 nm, multimode,
VCSEL, 0.55 km (0.3 mi)
6
Gigabit Ethernet, 1310 nm, single
mode, laser, 10.0 km (6.2 mi)
6H Gigabit Ethernet, industrially
hardened, 1310 nm, single mode,
laser, 10.0 km (6.2 mi)
7
Gigabit Ethernet, 1550 nm, single
mode, laser, 80.0 km (49.7 mi)
8
Gigabit Ethernet, 1310 nm, single
mode, laser, 40.0 km (24.8 mi)
8H Gigabit Ethernet, industrially
hardened, 1310 nm, single mode,
laser, 40.0 km (24.8 mi)
17A Gigabit Ethernet, Tx -1310 nm, Rx
-1490 nm, single mode (single
fiber), laser (WDM), 10.0 km
(6.2 mi)
17B Gigabit Ethernet, Tx -1490 nm, Rx
-1310 nm, single mode (single
fiber), laser (WDM), 10.0 km
(6.2 mi)
20 Gigabit Ethernet, 1550 nm, single
mode, laser, 120.0 km (74.5 mi)
22A Gigabit Ethernet, Tx -1490 nm, Rx
-1570 nm, single mode (single
fiber), laser (WDM), 80.0 km
(49.7 mi)
22B Gigabit Ethernet, Tx -1570 nm, Rx
-1490 nm, single mode (single
fiber), laser (WDM), 80.0 km
(49.7 mi)
9F Fast Ethernet, RJ-45 connector,
100m (238 ft)
9G GbE interface, RJ-45 connector,
100m (238 ft)
30 10/100/1000BaseT (with SGMII),
RJ-45 connector, 100m (238 ft)
UTP Built-in 10/100BaseT
+2 Network/user interface:
See the network interface ordering
options above
Note: It is strongly recommended to order this
device with original RAD SFPs installed. This will
ensure that prior to shipping, RAD has performed
comprehensive functional quality tests on the
entire assembled unit, including the SFP devices.
RAD cannot guarantee full compliance to product
specifications for units using non-RAD SFPs.
For detailed specifications of the SFP transceivers,
refer to the SFP Transceivers data sheet.
+3 User interface:
See the network/user interface
ordering options above
Table 1. Valid Port Combinations
Note: The N (SFP-ready slot) option in Table 2 can
be replaced with any SFP transceiver supported by
IPmux-24.
Network Network/User User
N N
N
N N
UTP
N UTP UTP
UTP UTP
UTP
UTP UTP
N
UTP N
N
