©Total Disc R epair Ltd | www. totaldiscr epair.co.uk | Technical Support: 0800 412 5424 - support@
totaldiscr epair.co.uk | Sales: 01202 489 500 - sales@
totaldiscr epair.co.uk
The Eco Pro is a single stage repair machine. The
depth of repair is dictated by the length of time that
the disc is processed for.
When you close the lid, the standard repair cycle will
start, which lasts for 30 seconds. However, you may
wish to extend this repair cycle for more heavily
damaged discs.
•
Closing the lid starts a 30 second repair, pressing
the
“START”
button once during this repair will
extend the total repair time to one minute.
Advanced Features
Extended cycles
Using the Blu-ray cycle
Notes
Your Eco Pro disc repair machine has already been
installed with the Blu-ray software required to repair
Blu-ray discs. Refer to the
“Disc Types”
section for
more information on the differences with Blu-ray
discs.
To switch to Blu-ray repairs:
•
Press the
“FUNC”
button. The display will change
from
“CD/DVD”
to
“BD”
when in Blu-ray mode.
•
Pressing the
“START”
button twice after closing the
lid, will add an additional minute, extending the total
repair time to two minutes.
•
The Bluray timings are the same as the standard
timings (30 seconds, 1 minute, 2 minutes, 4 minutes).
•
Just press the
“START”
button repeatedly to
increase the timings.
•
Press the
“FUNC”
button to go back to standard
disc mode.
•
Finally, pressing the
“START”
button three times
after closing the lid, will add an additional two
minutes, extending the total repair time to four
minutes.
