©Total Disc R epair Ltd | www. totaldiscr epair.co.uk | Technical Support: 0800 412 5424 - support@
totaldiscr epair.co.uk | Sales: 01202 489 500 - sales@
totaldiscr epair.co.uk
Maintenance And Information
Troubleshooting
Regular checks
Ordering consumables
Pad holders
When changing pads check the pad holder to make
sure that the Velcro has not deteriorated. Over time
the pad holders will need replacing.
Replacement pad holders : 5055378121562
These consumables are all listed on our website,
which is easy to use and offers free shipping on
orders over £50!
totaldiscrepair.co.uk/ecopro
Alternatively, you can give us a ring:
Sales: 01202 489 500
Tech Support: 0800 412 5424
Consumables stock codes
Consumables pack Std (800 minutes):
5055378113383
Cloth & spray pack (Standard):
5055378101656
Cloth & spray pack (XL):
5055378101663
Display
Cause
Action
Clean
Pads
No
KEY CARD
Add
Water
Change
KEY CARD
Water
Pump ON
Compound
Pump ON
Compound
Pump Rev
Starting
CD/DVD
XXXmins
BD
XXXmins
CD/DVD
Drying
auto prompt to clean pads
every 20 mins
press any button to clear alert
machine cannot recognise
the key card
turn off power switch, re-insert key card,
switch on power again
auto prompt to refill the
water bottle
press any button to clear alert
Water pump is priming
press any button to clear stop, refer to "getting
to know your machine" in this user guide
Compound pump is priming press any button to clear stop, refer to "getting
to know your machine" in this user guide
Key card and consumables
depleted
turn off power switch replace key card and
consumabes, switch on power
Compound pump priming
in reverse
press any button to clear stop, refer to "getting
to know your machine" in this user guide
Finishing repair
displays towards the end of the repair cycle
Ready to repair Bluray disc refer to "advanced features" in this user guide
initialization
displays while machine is calibrating after
being switched on
Ready to repair standard
disc
refer to "getting started" in this user guide
Nozzle Valves
Don’t forget to regularly check
that the compound nozzle valves
are clear of dried compound.
To clear these valves simple pull
from the machine, roll between
your fingers to clear the dried
compound, and then reinstall on
the machine.
Disc well
With the turntable
removed you can also
remove the disc well.
Rinse it periodically
to remove the residue
built up from the repair
process.
Turntable
Lift out the turntable and wash with warm water
occasionally.
Keeping the turntable clean will prolonge the life of
the turntable and will also help ensure the label side
of the disc remains clean and undamaged during
repair.
Over time the turntable will wear and will need
replacing.
Replacement Turntable : 5055378114083
The machine should not be left without the nozzles
valves in place, as these prevent air from working
its way inside the tubing and solidifying the
compound.
If the door will not open...
It can be opened manually by inserting a pen or
screwdriver into the slot on top of the machine and
moving it to the right to open the catch.
Understanding the Display codes...
