27
Declaration of Conformity
Europe
According to ISO / IEC Guide 22 and EN 450 14
Manufacturer’s Name:
Tripod Data Systems, Inc.
Manufacturer’s Address:
345 SW Avery Ave.
Corvallis, OR 97333 USA
Declares, under our sole responsibility, that the product:
Product Name:
Handheld Data Collector
Model Number:
Recon
Product Options:
ALL
conforms to the following Product Specifications:
Safety:
EN60950-1:2001
EMC:
EN 55022: 1994 +A1, A2: 1997 EN 55022: 1998 +A1:2000
EN 61000-3-2, 1995+A1+A2: 1998
EN 61000-3-2:2000
EN 61000-3-3:1995
EN 61000-3-3:1995+A1:2001 CFR 47, Part 15, Subpart B
EN 55024:1998*
EN 55024:1998+A1:2001*
R&TTE Directive 1999/5/EC:
EN 300 328 V1.6.1
EN 301 489-1 V1.4.1
EN 301 489-17 V1.2.1
Environmental:
EU Directive 2002/95/EC
China RoHS
Supplementary Information:
In addition to meeting the above EMC requirements during system test, the AC
adapter provided with this product has been certified to IEC 60950 +A1, A2,
A3, A4, A11.
* Product is battery powered.
Corvallis, OR USA
CAUTION:
Only approved accessories may be used with this equipment. In general, all
cables must be high quality, shielded, correctly terminated and normally
restricted to two meters in length. AC adapters approved for this product
employ special provisions to avoid radio interference and should not be altered
or substituted.
Unapproved modifications or operations beyond or in conflict with these
instructions for use may void authorization by the authorities to operate the
equipment.